Track, assign, and update referral orders from one list in the besa EHR

Purpose. Use this SOP to work referral orders from the Referrals tab on the Orders page. It shows each open referral in one row with the patient, insurance, specialty, receiving provider, progress checks, and the staff member assigned to it. The task is done when each referral you worked shows the correct progress checks, the correct Assigned To name, and the correct status, and those values are still there after a refresh.

Scope. For referral coordinators, support staff, clinical staff, and providers who track referrals in the besa EHR. This SOP covers the Referrals tab only. For the full referral and prior-authorization process, such as network checks, submission, and closing the loop, follow the Referrals And Prior Authorization SOP.

 

📚 Resources Needed

  • Knowledgebase SOP (printable Google Doc version of this SOP)
  • A besa EHR staff login with access to the Orders page.
  • The referral order, created from + Add Order with the order type Referral.
  • The patient’s current insurance information and the receiving provider’s contact details.
  • The Referrals And Prior Authorization SOP for the steps outside the EHR.

 

✅ Before You Start

  • Confirm the patient’s full name and date of birth on the row before you work a referral. Two patients can have similar names.
  • Check Assigned To first. If another staff member is assigned, check with them before you call the specialist or the patient, so the patient is not contacted twice.
  • The progress checks and Assigned To save as soon as you change them. There is no Save button in the row.
  • Changing a referral here changes the same order on the Order List tab. There is only one copy of each referral.
  • Emergencies come first. If a referral is clinically urgent, tell the provider or licensed clinical staff right away. Do not wait on the list.
  • Do not put more patient or clinical information in notes than the receiving provider needs.

 

🚀 Tips & Tricks

  • Ticking all four progress checks does not complete the referral. Status only changes when someone opens the referral, selects Edit, and changes Order Status.
  • Completed referrals leave this tab. The Referrals tab shows Draft, Pending, and Processing referrals only. Completed referrals are on the Completed tab.
  • Priority badges: High Priority means the referral was entered as Emergent. Medium Priority means Urgent. Routine referrals have no badge.
  • Only mine shows only the referrals assigned to you. It is highlighted when it is on.
  • A dot on Filter means a filter is on. A dot also shows beside each filter group that is in use.
  • Smaller screens: Address and Referral Notes only appear on wide screens, and Date on medium-wide screens. Scroll the table sideways to see every column, or open the referral to see all details.
  • Hover over a column heading or checkbox to see what it means.
  • Keep good specialists. Use + Add Provider or Save to directory so the next coordinator does not have to research the same office again.

 

📘 Instructions

Step 1 Open The Referrals Tab

  1. Sign in to the besa EHR and open the Orders page.
  2. Select the Referrals tab. It sits between Order List and Completed.
  3. Wait for the list to load. You should see one row per referral, with the status badge first. If there are none, the list shows No referrals found.

Step 2 Find The Referral

  1. Type a patient name or other detail in Search Referrals, then press Enter.
  2. To narrow the list, select Filter and use Status, Priority, Sort (Newest first or Oldest first), Date (From and To), Provider, or Name.
  3. Select Only mine to see only the referrals assigned to you.
  4. Confirm the patient’s full name, DOB, and Encounter # in the Patient column before you continue.
  5. Result: the list shows only the matching referrals, and Filter shows a dot while a filter is on.

Step 3 Review The Referral Details

  1. Read the row from left to right: Status, Patient, Insurance (carrier, Group, and ID), Address, Specialty (with the diagnosis), Referral Notes, Provider Referred To (with Auth # when there is one), Progress, Assigned To, and Date.
  2. Select the patient’s name to open the referral order and see every detail.
  3. If insurance or provider details are missing or wrong, fix the referral order before you contact anyone (Step 6).

Step 4 Assign The Referral

  1. In the Assigned To column, open the dropdown and select the staff member responsible for following up. The list includes all staff, not only providers.
  2. To remove an assignment, select Unassigned.
  3. Result: the name you selected stays in the dropdown. Refresh the page once to confirm it saved. If you see Could not assign the referral., the change was not saved (see Troubleshooting).

Step 5 Record Progress

  1. Complete each step in the Referrals And Prior Authorization SOP, then tick the matching box in the Progress column:
    • Coverage verified: the patient’s insurance coverage has been verified.
    • Distance & availability: the location and appointment availability work for the patient.
    • Packet faxed: the referral packet has been faxed to the receiving provider.
    • Patient messaged: the patient has been told about the referral.
  2. Tick the boxes in any order, and untick a box if it was ticked by mistake.
  3. Result: the box stays ticked and the status does not change. If the box clears again and Could not update the referral. appears, the change was not saved.

Step 6 Change The Status

  1. Select the three dots (…) at the end of the row, then select Edit. Or select View and then Edit.
  2. Change Order Status to Draft, Pending, Processing, or Completed.
  3. Select Save. Select Close instead to leave without saving.
  4. Result: a success message appears and the new status badge shows on the row. A referral set to Completed leaves the Referrals tab and appears on the Completed tab.
  5. Only mark a referral Completed when the referral loop is closed, as described in the Referrals And Prior Authorization SOP. Ticking all four progress boxes does not mean the loop is closed.

Step 7 Use The Row Actions

  1. Select the three dots (…) at the end of the row to open the actions menu.
    • View: open the referral order.
    • Edit: open the referral order ready to change.
    • Notes: open the order notes. These are the same notes you see on the Order List tab.
    • Download: download the referral order.
    • Download Encounter: download the visit note for the encounter the referral came from. This only appears when the referral has an encounter number.
    • Save to directory: save a one-time (guest) provider to the referral directory. This only appears when the provider was typed in by hand.
    • Remove: delete the referral order. A box asks Are You Sure? Select Delete only for a referral created by mistake or as a duplicate, after checking with the ordering provider. This cannot be undone.
  2. Completed referrals only offer View (and Save to directory when it applies).

Step 8 Save A Specialist To The Directory

  1. To add a new specialist, select + Add Provider. To keep a provider typed into a referral, select Save to directory in that row’s actions menu. The form opens with the provider’s details already filled in.
  2. Enter the NPI Number to fill in the form, then check First Name, Last Name, Speciality, Practice, Phone Number, Fax, Email (optional), Address 1, Address 2, City, State, and Zip.
  3. Use Directory Notes for what the next coordinator needs to know, for example: “Accepts Aetna PPO; earliest appointment September 18.”
  4. Select Save. Result: a success message appears, and the provider can be chosen in Referred To on future referral orders. Saving to the directory does not change the referral itself.

Step 9 Keep The List Current

  1. When you come back to the browser tab, the list checks for changes made by other staff.
  2. If a yellow message says 1 referral changed since you loaded this list. (or a higher number), select Refresh.
  3. Result: the list reloads with the latest status, progress, and assignments, and keeps your filters and page.
  4. Always refresh before you call a specialist or patient if the message is showing.

Step 10 Reopen A Completed Referral

  1. Open the Completed tab and find the referral.
  2. Select View, then Edit.
  3. Change Order Status to Pending and select Save.
  4. Result: the referral leaves the Completed tab and shows on the Referrals tab again.

 

👥 Roles & Responsibilities

RolePrimary Responsibility
Referral CoordinatorAssigns referrals, records progress checks, contacts receiving offices and patients, keeps the directory current, and updates status.
Ordering ProviderCreates the referral order with the correct specialty, diagnosis, priority, and notes, and answers clinical questions.
Clinical StaffEscalates urgent referrals and helps with clinical documentation within scope.
All StaffCheck Assigned To before contacting anyone, protect patient information, and refresh when the changed-referrals message shows.

 

🛠 Troubleshooting

A referral is missing from the list

  • Clear Search Referrals, turn off Only mine, and check Filter for a dot. Remove any filters in use.
  • Check the Completed tab. Completed referrals do not show on the Referrals tab.
  • Check the Order List tab. The order may not have been created as a Referral order type.
  • If it is still missing, contact Support with the patient ID and the order or encounter number.

A checkbox clears itself or “Could not update the referral.” appears

  • The change was not saved. Refresh the page once and tick the box again.
  • If it fails twice, stop and contact Support with the patient ID, the checkbox name, the time, and the exact message.

“Could not assign the referral.” appears

  • Refresh the page once and select the staff member again.
  • If the person you need is not in the list, or it fails again, contact Support with the staff member’s full name and the patient ID.

Someone else changed the referral while you were working

  • Select Refresh on the yellow message before you do anything else.
  • Check Assigned To and Progress again. If someone else now owns the referral, check with them before contacting the specialist or patient.

The status did not change after Save

  • Look for an error message in the referral form. Fix any required field it names and select Save again.
  • Refresh the list once to check. Do not change the status again until you have checked, to avoid undoing another coordinator’s change.

Download Encounter is missing or fails

  • It only appears for referrals that came from an encounter. Open the referral and check Encounter #.
  • If you see Could not download the encounter., try once more. If it fails again, send Support the patient ID and encounter number.

A referral was removed by mistake

  • Removing cannot be undone. Tell the ordering provider, then contact Support with the patient ID, the order or encounter number, and the time it was removed before anyone re-creates it, so no duplicate is made.

Contacting Support. When you contact Support, send only the patient ID, the order or encounter number, what you selected, the time, and the exact message on screen. Do not send diagnoses, insurance member IDs, or screenshots with patient details.

 

✅ Completion Check

  • The correct patient was confirmed by full name and DOB.
  • Assigned To shows the staff member responsible, and still shows it after a refresh.
  • Each progress check that is ticked matches work that was actually done.
  • The status is correct, and a referral is marked Completed only when the referral loop is closed.
  • No one else was working the same referral, and the patient or specialist was not contacted twice.
  • Any new specialist worth keeping was saved to the directory.
  • No duplicate referral was created and no referral was removed by mistake.

 

If anything on screen does not match this SOP, stop and contact Support before changing the referral again.